SOLVENT CLEANERS

SHUR SOLV

A completely non-flammable, non-toxic and non-conductive liquid.  It instantly removes dirt, grease, oil and sludge.  Spray, swab or apply with cloth and wipe away.

IN SOLV

A blend of solvents with exceptional grease cutting properties.  This industrially safe product is an efficient cleaner of electric motors, equipment, machinery and tools.  It will not oxidize, stain, etch or dull any metallic surface.

L S  555

This solvent degreaser contains emulsifiers, couplers, aliphatic hydrocarbons and corrosion inhibitors.  It may be cut with kerosene, mineral spirits, naptha, diesel or any other aliphatic hydrocarbon.  If not rinsed immediately, it leaves a protective coating to prevent corrosion.

RTU BIPHASE   DEGREASER

A ready to use version of our Biphase Degreaser.  Allows you to penetrate and dissolve heavy accumulations of grease and oil from metal surfaces without any pre-mixing.  Wash, then flush away with water.

PENETRON  PC

A blend of highly refined petroleum distillates, non-conducting surface tension reducing agents, and terpene hydrocarbons. This product contains no chlorinated solvents.  Recommended for re-circulating bath washes, parts washers, soak tanks, ultrasonic baths and more.

PRINT KLEEN

A special blend of solvents designed for use in cleaning and removing printing ink from machines, floors and equipment.  It also cleans rollers and blankets on printing equipment.  Use without further dilution as a soaking solution or with a brush or cloth to spot clean.  Non-flammable

WOOD FLOOR PREP

A waterless cleaner for use in removing dust, dirt and other surface soils from wood floors.  This product can be used after sanding or discing and prior to the application of wood floor seals and coatings.

SEAL STRIP

A non-flammable blend of solvents designed for removing solvent based seals from masonry surfaces such as brick, concrete, terrazzo, quarry tile and other similar surfaces.